CCNA 1 Chapter 3 2013

1. What application layer protocol is commonly used to support for file transfers between a client and a server?
HTML
HTTP
FTP
Telnet
2. What are two forms of application layer software? (Choose two.)
applications
dialogs
requests
services
syntax

3. A network administrator is designing a network for a new branch office of twenty-five users. What are the advantages of using a client-server model? (Choose two.)
centralized administration
does not require specialized software
security is easier to enforce
lower cost implementation
provides a single point of failure
4. What is the purpose of resource records in DNS?
temporarily holds resolved entries
used by the server to resolve names
sent by the client to during a query
passes authentication information between the server and client
5. What is the automated service that matches resource names with the required IP address?
HTTP
SSH
FQDN
DNS
Telnet
SMTP
6. What three protocols operate at the Application layer of the OSI model? (Choose three.)
ARP
DNS
PPP
SMTP
POP
ICMP
7. What are three properties of peer-to-peer applications? (Choose three.)
acts as both a client and server within the same communication.
requires centralized account administration.
hybrid mode includes a centralized directory of files.
can be used in client-server networks.
requires a direct physical connection between devices.
centralized authentication is required.
8. Which application layer protocols correctly match a corresponding function? (Choose two.)
DNS dynamically allocates IP addresses to hosts
HTTP transfers data from a web server to a client
POP delivers email from the client to the server email server
SMTP supports file sharing
Telnet provides a virtual connection for remote access
9. Which email components are used to forward mail between servers? (Choose two.)
MDA
IMAP
MTA
POP
SMTP
MUA
10. As compared to SSH, what is the primary disadvantage of telnet?
not widely available
does not support encryption
consumes more network bandwidth
does not support authentication
11. Which statements are correct concerning the role of the MTA in handling email? (Choose three.)
routes email to the MDA on other servers
receives email from the client’s MUA
receives email via the POP3 protocol
passes email to the MDA for final delivery
uses SMTP to route email between servers
delivers email to clients via the POP3 protocol
12. Which two protocols are used to control the transfer of web resources from a web server to a client browser? (Choose two.)
ASP
FTP
HTML
HTTP
HTTPS
IP
13. A small home network has been installed to interconnect three computers together for gaming and file sharing. What two properties represent this network type? (Choose two.)
User accounts are centralized.
Security is difficult to enforce.
Specialized operating system software is required.
File permissions are controlled by a single computer.
A computer that responds to a file sharing request is functioning as a server.
14. Which layer of the OSI model supplies services that allow user to interface with the network?
physical
session
network
presentation
application
transport
15.

ccna 1 chapter 3 answers 100%

Refer to the exhibit. What is the destination port for the communication that is represented on line 5?
80
1261
15533
3912
65520
16. What are two characteristics of peer-to-peer networks? (Choose two.)
scalable
one way data flow
decentralized resources
centralized user accounts
resource sharing without a dedicated server
17. What application layer protocol describes the services that are used for file sharing in Microsoft networks?
DHCP
DNS
SMB
SMTP
Telnet
18. What are two characteristics of clients in data networks? (Choose two.)
use daemons
initiate data exchanges
are repositories of data
may upload data to servers
listen for requests from servers
19. What is the role of the OSI application layer?
provides segmentation of data
provides encryption and conversion of data
provides the interface between the applications on either end of the network
provides control of all the data flowing between the source and destination devices
20. How does the application layer on a server usually process multiple client request for services?
ceases all connections to the service
denies multiple connections to a single daemon
suspends the current connection to allow the new connection
uses support from lower layer functions to distinguish between connections to the service

CCNA 1 Chapter 2 2013

CCNA 1 Chapter 2 V4.0 Answers 100% updated 2011
1. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)
determine pathways for data
initiate data communications
retime and retransmit data signals
originate the flow of data
manage data flows
final termination point for data flow
2. Select the statements that are correct concerning network protocols. (Choose three.)
define the structure of layer specific PDU’s
dictate how to accomplish layer functions
outline the functions necessary for communications between layers
limit the need for hardware compatibility
require layer dependent encapsulations
eliminate standardization among vendors
3. What are two functions of encapsulation? (Choose two.)
tracks delay between end devices
enables consistent network paths for communication
allows modification of the original data before transmission
identifies pieces of data as part of the same communication
ensures that data pieces can be directed to the correct receiving end device

4. What is a primary function of the trailer information added by the data link layer encapsulation?
supports error detection
ensures ordered arrival of data
provides delivery to correct destination
identifies the devices on the local network
assists intermediary devices with processing and path selection
5. Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)
Network
Transport
Physical
Data Link
Session
6. What is a PDU?
corruption of a frame during transmission
data reassembled at the destination
retransmitted packets due to lost communication
a layer specific encapsulation
7. Which characteristic correctly refers to end devices in a network?
manage data flows
originate data flow
retime and retransmit data signals
determine pathways for data
8.

ccna 1 chapter 2

Refer to the exhibit. “Cell A” at IP address 10.0.0.34 has established an IP session with “IP Phone 1″ at IP address 172.16.1.103. Based upon the graphic, which device type best describes the function of wireless device “Cell A?”
the destination device
an end device
an intermediate device
a media device
9.

ccna 1 chapter 2

Refer to the exhibit. Which three labels correctly identify the network types for the network segments that are shown? (Choose three.)
Network A — WAN
Network B — WAN
Network C — LAN
Network B — MAN
Network C — WAN
Network A – LAN
10. Which three statements best describe a Local Area Network (LAN)? (Choose three.)
A LAN is usually in a single geographical area.
The network is administered by a single organization.
The connection between segments in the LAN is usually through a leased connection.
The security and access control of the network are controlled by a service provider.
A LAN provides network services and access to applications for users within a common organization.
Each end of the network is generally connected to a Telecommunication Service Provider (TSP).
11.

ccna 1 chapter 2

Refer to the exhibit. Which networking term describes the data interleaving process represented in the graphic?
piping
PDU
streaming
multiplexing
encapsulation
12. What is the primary purpose of Layer 4 port assignment?
to identify devices on the local media
to identify the hops between source and destination
to identify to the intermediary devices the best path through the network
to identify the source and destination end devices that are communicating
to identify the processes or services that are communicating within the end devices
13. What device is considered an intermediary device?
file server
IP phone
laptop
printer
switch
14.

ccna 1 chapter 2

Refer to the exhibit. Which term correctly identifies the device type that is included in the area B?
source
end
transfer
intermediary
15.

ccna 1 chapter 2

Refer to the exhibit. What type of network is shown?
WAN
MAN
LAN
WLAN
16. Which layer encapsulates the segment into packets?
physical
data link
network
transport
17. What can be identified by examining the network layer header?
the destination device on the local media
the destination host address
the bits that will be transferred over the media
the source application or process creating the data
18.

ccna 1 chapter 2

Refer to the exhibit. Which set of devices contains only end devices?
A, C, D
B, E, G, H
C, D, G, H, I, J
D, E, F, H, I, J
E, F, H, I, J
19. During the encapsulation process, what occurs at the data link layer?
No address is added.
The logical address is added.
The physical address is added.
The process port number is added.
20. What is the purpose of the TCP/IP Network Access layer?
path determination and packet switching
data presentation
reliability, flow control, and error detection
network media control
the division of segments into packets
21. What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?
physical, network, application, data link, presentation, session, transport
application, physical, session, transport, network, data link, presentation
application, presentation, physical, session, data link, transport, network
application, presentation, session, transport, network, data link, physical
presentation, data link, session, transport, network, physical, application

CCNA 1 Chapter 1 2013

1. Which of the following descriptions are true regarding the management connections on a Cisco router? (Choose three.)
They are non-network connections.
They are used to connect the router to the rest of the production network.
They are synchronous serial ports.
They are used for initial router configuration.
They are asynchronous serial ports.
They are accessed using their assigned IP address.
2. The console port can be used for which of the following? (Choose three.)
debugging.
password recovery.
routing data between networks.
troubleshooting.
connecting one router to another.

3. Which of the following describes the function of a WAN?
connects peripherals in a single location.
connects multiple networks in a single building.
provides connectivity on a LAN.
provides connectivity over a large geographic area.

4. An internetwork must include which of the following? (Choose three.)
switching.
static addressing.
IETF standardization.
dynamic or static routing.
consistent end-to-end addressing.
5. ABC Company just purchased three new routers to start their company network. Which items are needed to establish a terminal session between a PC and the router for the initial configuration? (Choose three.)
straight-through cable.
terminal emulation software.
rollover cable.
RJ-45 to DB-9 connector.
V.35 cable.
6. Terminal emulation software, such as HyperTerminal, can be used to configure a router. Which of the following HyperTerminal options shown in the graphic are correctly set to allow configuration of a Cisco router? (Choose three.)
bits per second.
data bits.
parity.
stop bits.
flow control.
7. Which of the following devices are used in the construction of a WAN? (Choose three.)
hubs.
routers.
communication servers.
transceivers.
modems.
multi-port repeaters.
8. Which of the following are functions of RAM? (Choose three.)
contains startup configuration file.
stores routing table.
holds fast switching cache.
retains contents when power is removed.
stores running configuration file.
9. Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.)
can be accessed remotely.
does not depend on network services.
displays startup and error messages by default.
does not require special components.
ccna answers ccna final ccna exploration
10. Which basic components do a router and a standard desktop PC have in common? (Choose three.)
CPU.
hard drive.
input/output interfaces.
keyboard.
monitor.
system bus.
11. During the initial configuration of a 2600 series Cisco router, which cable is required for connecting a PC to the console port?
twisted.
crossover.
rollover.
straight.
12. A router is composed of many internal components. Which of the following components stores a copy of the router’s configuration file?
metal-oxide memory.
read only memory.
flash memory.
non-volatile random access memory.
13. What contains the instructions that a router uses to control the flow of traffic through its interfaces?
packet configuration.
configuration files.
flash memory.
internal components.
14. Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which of the following would be needed to physically connect a router to all of the hosts on the LAN? (Choose two.)
a crossover cable between the transceiver on a router and a switch.
a crossover cables between a switch and hosts on a LAN.
a straight-through cable between the auxiliary port on a router and a switch.
a rollover cable between the console port on a router and a switch.
straight-through cables between a switch and hosts on a LAN.
a straight-through cable between the transceiver on a router and a switch.
15. Which router component holds the configuration file when power is lost?
volatile random access memory.
read only memory.
non-volatile random access memory.
flash memory.
16. Which of the following layers of the OSI model are incorporated in WAN standards? (Choose two.)
physical layer.
application layer.
transport layer.
data link layer.
session layer.
17. Which of the following are true regarding router interfaces? (Choose three.)
provide temporary memory for the router configuration files.
connect the router to the network for packet entry and exit.
can be on the motherboard or a separate module.
hold the IOS image.
connect the router to LANs and WANs.
18. Which of the following tasks can be accomplished through a management connection on a router? (Choose three.)
troubleshooting problems.
monitoring the system.
capturing LAN data packets.
configuring the router.
routing data packets.
19. What do routers use to select the best path for outgoing data packets?
ARP tables.
bridging tables.
routing tables.
switching tables.
20. Which of the following are functions of NVRAM? (Choose two.)
stores the routing table.
retains contents when power is removed.
stores the startup configuration file.
contains the running configuration file.
stores the ARP table.
21. Select the statements that correctly describe flash memory in a 2600 series router? (Choose two.)
holds the startup configuration by default.
can be upgraded with single in-line memory modules.
stores Cisco IOS software images.
stores routing table information by default.
maintains the only copy of an IOS image after the router is booted.